¡¢
80W 220V/110V Water Pump Flow 3500L/H Hmax 3.5m Dry Run Protetion Muti-fuctional Submersible Pump for CNC Spindle Motor, Miniature Foutains, Air-conditioning Fan, Foutain, Aquarium Fish Tank
Product parameters:
Voltage: AC 220V /110V £¨optional£©
Pump lift: 3.5M / 11.5ft
Power: 80W
Traffic: 3500L/H (MAX) (The maximum spray volume of this water pump can only be achieved under the pressure removal and the maximum voltage power.)
Voltage: 220V~240V/50HZ
Material: ABS + metal
Drive method: Electric
Plug type: CN plug¡¢US plug¡¢EU plug¡¢AU plug¡¢UK plug (optional£©
Applicable range: cooling 0.8/1.5/2.2kW water-cooling spindle motor
Weight: about1.2KG
Note:
1.Do not idle running the pump without water,the water pump mustimmersed in water to use.
2.The product is used for carving machine water circulation for spindle motor cooling, the product is lift 3.5m submersible pump, the pump work required is totally not into the tank, tank water level is about 2 times the height of the above can pump! Try to avoid anhydrous air operation
3.Cooling water circulation system is mainly used in wood engraving mould machine engraving machine stone engraving machine engraving machines and other equipment. The external water supplied to the spindle motor engraving tools need to be cooled and then to achieve the desired cooling effect, the cooling system of the large flow high lift can better prolong the spindle motor and the tool life, is the auxiliary facilities of engraving machine, CNC equipment standing.This is submersible water pump pplicable for 0.8/1.5/2.2kW water-cooling spindle motor,CNC machine,marking machine, water fountain, etc.
4. ABS housing has good resistance to heat nd impact, ensuring long lifespan of the pump.
How to use XILAIYUE` 80W 220V Water Pump?
1. Before using, take the pump and fix to a suitable outlet, and then connect with the hose.
2. Sucker has a fixed and s cushioning effect, please fix the suckers on the bottom plate when lying flat or adsorbing on the wall.
3. If fixing the pump with the rope, it is no need to fix the sucker.
It also can used the right sticks, nails to fix the pump through fixing the holes of bottom plate.
4. After fixing firmly, you can connect with the appropriate power supply, and the pump start working.
5.This product is installed thermal protection, when the motor is overheating because of abnormal operation, the motor will automatically cut off the power.
6. The pump casing and all the parts which contact with the outside are using aid, alkali and salt-tolerant material. It can be used in salt, acid, alkali and salt environment.
7. This pump can be used as the amphibious pump.
8. This product uses a unique design of the motor and pump body structure, it has characteristics such as lower power consumption, longer life.
9. This product equipped with multiple connecting ways. It can connect with tubes of a variety of specifications in kinds of occasions.
10. Do not pump heated liquids with a temperature higher than 35¡É.
11. Please make sure the pump working in clean water.
About Maintenance:
If the pump will be not used for long-term, please take the pump out of the water, and let the pump work in the clean water for a moment, and then clean the parts of pump and wipe clean.
If the temperature is below 0¡É, please take the water pump from the water immediately and discharge accumulation of water in the pump, in case pump is broken because of freezing.
Before using the pump, please make sure the rated voltage marked on the nameplate and the voltage of actual use is consistent.
When installing, removing and cleaning the pump, you must unplug the power plug to ensure safely.
If the pump has been a serious collision, please check the pump, if broken, please stop using immediately.
Not intended to be moved when plugged in or in operations.
The power cord of the water pump cannot be replaced. If the power cord is damaged during use, it must not be used any more.
Do not lift the pump by the power cord.