aHR0cDovL2ZyZWVzaGlwLmNvLmty
¿É¼ÇÁ¤º¸
[(200006151)Group of four]Specifications: Green 6mm, Orange 9mm, Yellow 12mm, Red 18mm, Blue 25mm
The plastic packaging may be damaged during transportation, but the product is intact, so rest assured to buy.
Occasional scratches due to plastic properties are not quality problems and there is no reason for refund
Instructions for use£º
Example: For a 12mm tape maker, prepare a 24mm wide slanted cloth strip (45 degree angle is the best), which needs to be longer than the expected production length.
When in use, cut the front end of the cloth strip into a triangle shape for easy insertion. Enter from the large end of the tape maker and exit from the small end.
After pulling out the cloth strip, do a little tidying up and flatten it with an iron.
Same as above for other models
tips£º
6mm is the finished width of the edging strip. Prepare 12mm width diagonally cut fabric strips, with 3mm edge binding (folding the edge strips in half)
12mm is the finished width of the edging strip. Prepare diagonally cut fabric strips with a width of 24mm, and the edge of the work is 6mm (the edge strips are folded in half)
18mm is the finished width of the edging strip. Prepare diagonally cut fabric strips with a width of 36mm, and the edge of the work is 9mm (the edge strips are folded in half)
25mm is the finished width of the edging strip. Prepare a 46mm width diagonally cut cloth strip, with an edge of 11.5mm (the edge is folded in half)
Friendly reminder for your reference£º
6mm (narrow side type): Thin belt, decorative edge, commonly used model for glass painted patchwork;
12mm (narrow edge type): commonly used models for thin straps and decorative edges;
18mm (regular type): the regular width of the edging strip;
25mm (wide side type): thick work / wide side hemming with regular width;