6in Inline Duct Fan 80W Dual Speed Powerful Airflow Ventilation Exhaust Blower for Grow Tent
Feature:
1. Scope of Application: Inline duct fan can be used in family residences, Internet cafes, KTV, restaurants, offices, office buildings, shopping malls, hotels, etc.
2. Eliminating Odors: Ventilation exhaust fan is designed to eliminate odors and chemicals from grow tents and hydroponic chambers.
3. Circulating Air: Vent blower is used to ventilate grow tents, transmit heating or cooling air to rooms, circulate fresh air, remove odors.
4. Quiet Operation: Professional manufacturing, low noise operation, without any harm to your health and will not affect your work.
5. Strong Wind: This is a powerful ventilation blower with a fan speed of 2200/2550 r/Min, which is fast to cool or heat the room.
Specification:
Item Type: Inline Duct Fan
Material: PP
Characteristic: 6in two speed adjustment
Size: Approx. 31x24x20cm/12.2x9.45x7.87in (L x W x H)
Pipe Hole Diameter: Approx. 15cm/5.91in
Input Frequency: 50Hz
Power: 80W
Air Volume (M3/H): 540M3/H
Air Pressure (Pa): 300Pa
Speed: 2200/2550r/Min
Cable Length: Approx. 60cm/23.62in
Scope of Application: Family residences, Internet cafes, KTV, restaurants, offices, office buildings, shopping malls, hotels, moxibustion physiotherapy smoke exhaust, laboratories, computer rooms, chess and card rooms, gymnasiums, beauty salons, fitness clubs, basements, swimming pools, etc. ventilated environment
Weight: Approx. 2500g/5.51lb
Package List:
1 x Inline Duct Fan
4 x Screw
4 x Rubber Plug
1 x Manual
Note:
Before starting the machine, please confirm:
The device is solid and the wiring is correct.
Safety guards are properly installed.
Any installation residue that could be sucked in by the fan has been removed and the ducts connected to the fan have been cleaned.
The ground wire is connected correctly.
Electrical safety devices are properly connected and adjusted to the correct position.
How to use:
Plug in the power to use, you need to confirm:
Make sure nothing is sucked in around the fan.
When installing the equipment, please ensure that all accessories are installed in place, and the structure of the fan can ensure the load caused by the full?load operation of the fan.
Before using the device, make sure that the power supply is disconnected, even if the device switch is off.
The power supply unit must be equipped with a double pole switch with a distance of at least 3mm between the contacts. The dimensions and specifications should comply with the relevant national power supply regulations.
If a ground wire is required, check that your wiring is correct, and make sure that the overheating and overload protection wires are properly connected and adjusted to the relevant range.