1, product selection materials, high quality spring steel!
2, clamping force big, clamping range, high precision.
3, widely used in, boring, milling, drilling, screw, sculpture, CNC, spindle machine, the processing
material are: 65Mn (65 Mn)
pls leave message ,which mode do you want to order
model | height(mm) | width(mm) | center hole(mm) | price |
ER11-3.175 | 18 | 11 | 3.175 | 3.5 |
ER11-4 | 4 |
ER11-6 | 6 |
ER11-6.35 | 6.35 |
ER16-3.175 | 22 | 17 | 3.175 | 4 |
ER16-4 | 4 |
ER16-6 | 6 |
ER16-6.35 | 6.35 |
ER16-8 | 8 |
ER16-10 | 10 |
ER20-3.175 | 31 | 21 | 3.175 | 4.2 |
ER20-4 | 4 |
ER20-6 | 6 |
ER20-6.35 | 6.35 |
ER20-8 | 8 |
ER20-10 | 10 |
ER20-12 | 12 |
ER20-12.7 | 12.7 |
ER25-3 | 34 | 25 | 3 | 5.2 |
ER25-3.175 | 3.175 |
ER25-4 | 4 |
ER25-6 | 6 |
ER25-6.35 | 6.35 |
ER25-8 | 8 |
ER25-10 | 10 |
ER25-12 | 12 |
ER25-12.7 | 12.7 |
ER25-16 | 16 |
ER25-20 | 20 |
usage
1.The chuck into the pressure inside the cap, gently turn the circlip, to be the pressure cap eccentric part recessed circlip groove along the direction of the arrow uniform force to promote the circlip can be loaded into the pressure cap.
2 the circlip and pressure cap installed together on the chuck body or machine tool spindle, wipe the tool cylindrical shank into the clamping hole, use a wrench to tighten the pressure cap uniform force, until the tool folder prison date before to use.
(Note: not installed and bogey in the tool tightening pressure cap, so as not to damage the circlip)
3 tool change with a wrench to loosen the pressure cap with a chuck and tool, remove the tool, the direction of the arrow push hard circlip, so quit, and then the Circlip can put the other aperture needed.