DC12V 1CH Receiver Board
1.Working Voltage: DC12V more or less than 10%
2.Current:Standby less than 10mA,Working less than 128mA
3.Working Temperature: -10 \'C—+60\'C
4.Receiver Frequency: 315MHz/433MHZ
5.Receiving Sensitivity: -105dB
6.Output State: Switching Value/ DC12V
7.Max Load:10A Relay, Resistive load less than 8A,Inductive load less than 3A
8.Receiver Board Size:55×31×16mm
9.Case Size:34×26×15mm
Learning Code: Add transmitter by the Learning Button on the receiver
Output State: It is adjusted by different Dot on the Receiver Board,
Momentary---------- Connect "M & the Below Dot "
Toggle----------------Connect "T & the Below Dot "
Latched--------------No Connection
Momentary------------Press the Transmitter button and keep, the receiver relay is ON, release button, the receiver relay is OFF,
Toggle---------------Press transmitter button for 1 time, the receiver relay is ON, press button again, the receiver relay is OFF,
Latched------------------Press transmitter button A, the receiver relay A is ON, Press Button B, the Receiver is OFF
Learning Method
Input DC12V for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully.
Clearing Code
Press the Learning Button and hold on the receiver until the LED indicator ON and wait for 5s until the LED Indicator OFF, then Release your finger, 5s later the LED Indicator will ON again, and 1s later OFF ,it mean the code have been cleared successfully.
Transmitter Distance:50-1000m
1 Transmitter + 1 Receiver