aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ±Ý¼Ó À¯Çü: STAINLESS STEEL
- Àç·á: ±Ý¼Ó
- Á¤¿ø È£½º ¸± À¯Çü: ¹° È£½º
- ±Ù¿ø: CN (Á¤Ç°)
- À¯Çü: Á¤¿ø È£½º ¸±
- Theory: Mixed Flow Pump
- Fuel: Electric
- PH Value: 3 to 9
- Liquid Temperature: -15¡É~+120¡É
- Max Ambient Temperature: +40¡É
- Gas Liquid Volume Comparison:1: 9
- Frequency: 50Hz
- Voltage: 220V/380V
- Motor Phase: Single-phase / Three-phase
- Power: Electric,550W / 750W / 1.1KW / 1.5KW / 3KW/5.5KW
- Flow Rate: 1T/h,2T/h,3T/h,6T/h,12T/h
- Capacity: 250-4000 L/h
- Head(H): 40m
- Speed: 2900 Rpm
- Bubble Size: 20~30¥ìm
- The Dissolution Efficiency Can Reach: 95%
¿É¼ÇÁ¤º¸
[(29)0.55KW 220V Pump][(366)0.55KW 0.75KW Kit][(10)0.75KW 220V Pump][(200002984)1.1KW 220V Pump][(496)1.5KW 380V Nano][(200006151)1.5KW 220V Pump][(175)3KW 380V Nano][(173)0.75KW 220V Nano][(1063)1.1KW 220V Nano][(193)1.5KW 220V Nano][(200006152)0.55KW 220V Nano][(200006153)0.75KW 380V Pump][(200004891)1.1KW 380V Pump][(200005536)1.5KW 380V Pump][(365458)3KW 380V Pump][(200004890)5.5KW 380V Pump][(100013777)1.1KW 380V Nano]Product description
Startup and shutdown
Before starting, pump and pipe should be cleaned.
Initial Startup
1. Before the initial operation, the pump must be filled with water, and then the inlet valve and outlet valve of the pump are fully open. After the inlet valve is closed, the power supply is briefly switched on to confirm the correct rotation direction of the pump and then enter the formal operation.
2. First adjust the outlet pressure valve until the pressure gauge shows the required pressure for the handling system. Then open the intake valve and slowly reduce the intake valve until the gas flowmeter shows the desired suction volume. The pressure of dissolved air float and other uses is between 0.3-0.5mpa. Inspiratory volume is recommended to be set at 7-8% or no more than 10% of water flow. 3. When the water pressure is higher than the required range, the gas-liquid mixing effect is not significantly helpful. On the contrary, it will reduce the production amount of dissolved gas and water and increase the power consumption of the pump. Note: the pump should not run for a long time when the outlet regulating valve is closed, so as to avoid damaging the parts of the pump due to high temperature.
Daily operation
Once the proper use conditions are set for the initial operation to achieve the desired effect, there is generally no need to adjust the inlet valve and outlet valve frequently during daily operation. In order to facilitate operation, you can install a ball valve and other closed valves in front of the inlet valve and after the outlet valve, so that the usual operation and maintenance of the use.
Note: Turn on the pump power before opening the suction valve (automatic control requires the installation of delay switch)
Downtime
To stop the operation of the pump, the first is to close the suction valve, until the gas in the pipeline is all discharged after the pump power supply. In this way, the air and water mixture in the exhaust pipe road can be avoided by suction pipe suction valve caused by suction pipe end equipment damage.
Note: If the temperature is below freezing point, the liquid in the pump should be emptied to avoid freezing damage to the equipment. If the machine is shut down for a long time, filling materials (such as lubricating oil, etc.) should be added in the pump to avoid scaling or birth in the pump
Product display
HOW TO SET UP THE BUBBLE GENERATOR?
1. Fit the machine with water hose and power cables according to the diagram, and fill the machine with water before use.
Remove the water inlet valve, raise the water inlet hose and fill it with water, wait until water comes out of the outlet valve, put back the water inlet valve and tighten it by hand.
2. Close the gas flow meter, turn on the power supply, wait for the machine to pump water normally (the sound becomes louder), then slowly open the gas flow meter and adjust it to the specified position, within about 30 seconds the pump will produce nano bubbles (the sound quietens down).
Our production drawings
NOTE
1. The?DIFFERENCE?between a single?PUMP?and a?WHOLE SET:
A?WHOLE SET?of nano bubble generator contains a dissolved gas tank, which allows the gas and liquid to?MIX TWICE, thus producing?MUCH SMALLER BUBBLES.
While a single?PUMPcan only let the gas and liquid finish mixing?ONCE, so the bubbles will be relatively?LARGER.
2.?110V?pumps need?CUSTOMIZATION, the lead time is about?10-15 DAYS.
Payment:
-We?accept?the?following?payment?methods:
-Credit?Card,?VISA,?Bank?to?Bank?Wire?Transfers,PayPal,?Western?Union?and?so?on. -All?payments?made?on?AliExpress?are?processed?by?Alipay?and?PayPal.
Shipping:
-Please?pay?more?attention?to?your?order?address?which?MUST?MATCH?your?shipping?address. -Shipping?will?be?worldwide?via:?e-Packet?/?China?post?air?mail/?CDEK?/?ARAMEX/?EMS?/?UPS?/?FEDEX?/?DHL?/?TNT. -Remote?area?may?cause?extra?shipping?fee.
-Please check items when delivered, if damaged, please kindly accept it and contact us immediately.We will make a confirmation and resend you a new one.
Warranty :
-1 years manufacture warranty:
We will offer your free new parts or accessories with free shipping during 3 months after your purchase.
We will offer your free new parts or accessories but you need to pay for some shipping fee if more than 3 months less than 1 year .
-Defective problem has to be submitted within 7 business days after product is delivered;
-Shipping damage has to be submitted within 5 business days after product is delivered.
-Please show us photo or video if happens problems on products.
Contact Us
-If you want to order bulk wholesale, please feel free to contact us.
-If you need to order multiple products, please contact us first. We can offer you some discounts.
Feedback
-All products are 100% brand new and original products, and have been rigorously tested again before shipment to ensure that each piece is brand new and high-quality products.
-Customer satisfaction and support is our goal.
-Dear Friend, Any feedback from you will be greatly appreciated. If you are satisfied with our services or products, please give us 5 stars.
-If you have any questions, please contact us, we will contact you as soon as possible.
Please Note
-Import duties, taxes and charges are not included in shipping cost.
-For our customers from Brazil,Chile: if you choose any courier, please leave your tax number so that ensure our delivery normally.
- What if you are dissatisfied with the products, or the products has any quality problems, please contact me at any time, we will solve your problem, unnecessary to submit a dispute.