Name: portable sewing machine
Weight: 80 g
Size: 11 * 7 * 2.3 cm
Color: Random Color
Specification: manual sewing machine
Application: sewing tools
Instructions for use:
1. Standby: four fingers with the right hand care base, thumbs naturally on the body cover, hold the machine steady.
2. Thread the thread as shown in Fig. 1. Pull the thread of the bobbin slightly out through the thread guide A. Then insert the thread tension adjustment piece B. Pass the thread through the thread guide C. Temporarily hold the thread on the needle Next, the other threader from the front of the needle (to the fuselage junction) through the needle hole and then the thread into the threader hole, exit the threader pull out the line head 2-3 cm pressure plate can be suppressed use
3. Put on: Use your right index finger to lift the platen, the fabric is ready to be sewn into the platen flat, gently put back pressure plate to suppress the fabric.
4. Sewing operation: holding the fabric with his left hand, gently press the right thumb under pressure on the end of the pressure under the cover, thumb lift and then pressed, so repeatedly, the feed mechanism automatically sewn objects sent to the left. Hold the right hand gradually moved to the right hand holding cloth with the sewing rhythm gently move the sewn to the left until the end of the sewing. After cutting the thread on the pressure plate, pull up the pressure plate and gently pull the fabric out to tighten it. (Note: Because the machine only uses a bobbin, so the line under the platen does not have to be cut out and can be pulled out otherwise it can not be tightened)
5. The machine automatically into the fabric and adjust the tension between the pins. Figure nut adjustment.
6. Change the thread group: If you want to change the size of the thread group, you can connect the spare thread length bar with the thread spool and put it into the thread group. Then rewound the thread and adjust the thread tension.
?
7. Change the needle: Loosen the fixing screw, take out the broken needle, install the new needle, pay attention to align the flat surface of the needle with the fixing screw, and can not be installed in reverse.