EA0011428
Specifications:
Condition: Brand New
Input voltage: 12V-60V
Input current: input current 15A
Output voltage: 12V-80V continuously adjustable
Output current: Maximum output current 10A (adjustable)
Output power: effective power P = input voltage V * 10A
Conversion efficiency: up to 95% (input voltage and current; output voltage and current affect conversion efficiency)
Short circuit protection: fuse
Module size: 85*62*70mm
Working frequency: 150KHz
Working temperature: -40~+85¡Æ (please strengthen heat dissipation when the ambient temperature is too high)
Static working current: 15mA (measured when 12V rises to 20V, the higher the output voltage, the higher the static current will increase)
Over-current protection: Yes (input exceeds 17A, the output voltage is automatically reduced, and there is a certain range of error.)
Input reverse connection protection: none
Features:
600W high power booster module, adjustable wide voltage output; output current can be adjusted; ultra-
low input and output pressure difference.
booster plate fixed above the radiator, rational design, integrated design of radiator and booster plate,
convenient for users to use directly, use long screws fixed directly.
The module has a constant voltage and constant current function, but it is a non-isolated boost mode, due
to its characteristics, the constant current range depends on the input and output voltage and load.
Please Power on the module first, then connect the load, which is especially important in high-power loads;
the input voltage should be stable, especially when some low-voltage (12V) input power supply is
connected to the load voltage, it will fall below 10V, and it is easy to break down the power tube at this time.
Two or more modules can not be used in parallel input and output, otherwise the current limit function will be invalid.
Package Included:
1pc x DC to DC Boost Converter
Note:
Other accessories demo in the picture is not included.
Actual colors may be a little different due to different monitors.
Please allow 1-5mm deviation due to manual measurement.