About the wiring method: There are 2 wires in the DC electric push rod motor (12V/24VDC) line connected to the positive and negative poles, the positive and negative poles are interchanged to control the push-out and retraction, and a positive and negative switch can be added to control the expansion and contraction. The faster the speed, the smaller the thrust; the slower the speed, the greater the thrust
The push rod motor bracket/controller/power supply/ needs to be purchased separately, and the user who needs it should contact customer service.
Instructions for use and precautions:
1. The push rod motor has a built-in limit switch, which automatically stops at the end/end (extend to the end/retract to the end), and stops if any power failure in the middle.
2. The stroke of the push rod motor is not adjustable and has been set at the factory. Power supply DC 12V or 24V.
3. The speed of the push rod can be adjusted by adjusting the voltage of the push rod motor, reducing the voltage and reducing the speed and thrust at the same time.
4. Note that multiple push rods are used at the same time. Due to the tolerance of internal gears, motor rotors and other accessories, the speed is roughly the same
Installation size
(1) After the push rod is fully retracted, the center distance between the front and rear mounting holes is the minimum installation distance of the push rod (that is, the length of the push rod).
Retract length L=100MM+S
(2): The center distance between the front and rear mounting holes when the push rod is fully extended
Extension length L=100MM+S+S
L = minimum installation distance
S = stroke (extending length)
Example: stroke 100mm push rod
After fully retracted, the hole center distance is 205MM (L=100MM+stroke 100MM)
After it is completely pushed out, the center distance of the hole is 305MM (L=100MM+stroke 100MM+stroke 100MM)
More durable
The interior of the fuselage adopts powder metallurgy technology, pure metal gears, and the service life is longer
More stable
Screw washer design, specially added flat washer, effectively prevent the screw from falling off automatically
Electric wire
Safe and energy-saving, durable.