Detailed introduction to long and short faucets
NEW UPGRADE
SHOWER BATH FAUCET SET
Dear friend, this is the effect of our upgrade
ALL ATTACHMENTS
1. Shelf 2. Handheld shower stand
3. Raw meal glue 4. Plastic wrench
5. Water pipe retainer 6. Install the curved angle
7. Curved angle gasket 8. Decorative cover
9. L-shaped tube 10. Shower head
11. Hose 12. Faucet valve
13. Hand shower 14. Straight pipe
Dear friend, our faucet has three modes: top spray, hand spray, and hot and cold water modes
EXPLOSION-PROOF CURVED CORNER
Adiustable Large Distance£º165mm
Adiustable Small distance£º135mm
And our shower set can adjust its height and rotate 360 degrees
Rotatable Up&Down.
Not Restricted By Height
Flexible & Simple Operation
DETAILS DISPLAY
Shower Head Strainer
how to install
Installation of shower head and other parts
1.Put the shower tube and the L-shaped tube well and connect the mixer
2.Fix the assembled parts on the fixed accessories and mark them inside
3.Use an electric drill to make holes at the marked points
4.Use a hammer to drive the expansion nail into the wall
5.Screw in the screw with a screwdriver
6.After the fixing accessories are installed, fix the shower tube, L-shaped tube and mixer, and tighten the screws
7.Install other components according to the position shown in the figure
Shower mixer installation
1.Wrap the two brass adapters around the Teflon tape and screw them into the mounting holes with a wrench
2.Put the decorative cover into the brass adapter
3.Insert the washer into the hexagonal nut on the back of the faucet and align the faucet to the position of the brass adapter
4.Rotate the position of the two brass adapters to correspond to the nut position of the faucet
5.Wrap the outer end of the brass adjuster with the Teflon tape, use a wrench to tighten the nut
The faucet is simply chic, the quality is very good
Detailed introduction to long and short faucets